Send part in to APSCO. Please allow 2-12 weeks for delivery.

Labor approx. $68.00

Complete Rebuilding. Orthophonic. Service includes new ball bearings, adjust, clean, and test.

Approximately  $78.00

* PARTIAL LIST OF VICTOR SOUND BOXES *

EXHIBITION SOUND BOX. Rebuilt original. Used on external horn Victors and pre 1920 victrolas.

Nickel $155.00

Gold $165.00

VICTROLA NO. 2 SOUND BOX. Rebuilt original. Used on some late model external horn Victors and post 1920 Victrolas.

Nickel $155.00 Gold   $165.00

STEEL NEEDLES .... See 'ACCESSORIES'

* VICTOR HORNS AND HORN ELBOWS *

VICTOR III, IV, etc. HORN. Unpainted, Paneled Horn. $225.00 Write for postage estimate.

HORN ELBOWS Victors I-V (1 to 5). Specify model. Made like the original: nickel plated steel, with flanged base.

Inquire with model and top of bracket ID.

GRILL CLOTH FOR ORTHOPHONICS. Specially-woven acoustic grill cloth. Near to original design and color. 20" W X 36" L. Smaller sizes available - Inquire for price with dimensions. Gold and black - like original..

$78.00

ORTHOPHONIC TONE ARM SUPPORT. We have made 2 of the many sizes of new Orthophonic tone arm supports.  (Distance between the two screws on the skirt of the support which sets on top of the base plate are either 2 3/8" or 2 3/4")
You need to send the base plate with the old, broken support still in place, along with the pin, if you have it and the tone arm.  (No reproducer necessary, unless you want us to rebuild the unit: approx. $78  labor)  Usual cost is $168 and turn time is about 4-10 weeks.  If it is not one of the sizes we offer, we see if a repair can be considered.  (Include any broken off piece, if not a bag of crumbles).  If not, we return as is.

* PARTIAL LIST OF VICTOR SOUND BOX PARTS *

Our own mica diaphragms made of the highest quality mica, for all model disc reproducers. We machine-cut every size diaphragm listed in Everybody's Talking Machine Catalog. See 'BOOKS'

13 sizes available.

Complete with gaskets and wax to seal diaphragm-needle bar screw.

Complete with Red O-Ring gaskets and wax to seal diaphragm-needle bar screw.

See also, 'Complete Rebuilding'.

* GASKETS *

EXHIBITION GASKETS. Proper dimensions for perfect fit and sound quality. White like original.

1 Set of two $2.95

10 foot length $ 12.00

VICTROLA NO. 2 O RINGS. Proper dimensions for perfect fit and sound quality. Red like original.

set of two $3.50 5 pair $12.00

*NEEDLE BAR BALANCE SPRINGS*

	Exhibition Balance Springs	set of two $9.95
	Victrola No. 2 Balance Springs	set of two $9.95

WRENCH To adjust balance springs. Specify: Exhibition or Victrola No. 2.

Each $4.50

One of each for $8.00

ORTHOPHONIC NEEDLE BAR BALL BEARINGS 16+ pieces. Comes with material for rubber washers. A must for proper rebuild.

$6.95

BLACK RUBBER BACK FLANGE

Exhibition Rubber Back Flange	New, like original.	$13.95
Victrola No.2 Rubber Back Flange	New, like original.	$11.95

THUMB SCREWS

TAP BROKEN THUMB SCREW STUD. Send needle bar only, unless part of a repair/rebuild job.                                                                                                   Approximately ... $10.00

STEEL NEEDLES .... See 'ACCESSORIES'

APSCO
7994 CR 10,  PO Box 123
Davenport Center, N.Y. 13751
Voice & FAX: 607-278-6218
 
email: apsco@antiquephono.com